RANGE OF APPLICATION: Water-impermeable. It has the ability to repel moisture, which allows the surface to breathe. It creates different patterns depending on the application technique. It does not contain harmful impurities. It is safe for health and environment. It is used as a decorative facing material of the last layer in the external facades of all structures and in thermal insulation systems.

PROPERTIES: It is highly resistant to water and freezing. It has a natural and decorative look. Easy to apply.

SURFACE PREPARATION: It is necessary to clean the surface of formwork oil, paint, dust, etc. substances. Shaky, unstable parts must be removed from the surface. Care must be taken to protect the plastered surfaces from dust. After moistening the surface, it will be possible to start using.

PREPARATION OF MORTAR AND APPLICATION: Pour the appropriate amount of water (5-5.5 liters of water/25 kg of powder) into the container for mixing the solution. Powdered material is poured here and stir with a low-speed hand mixer. Then leave for 5 minutes and then stir until a homogeneous mass is formed. The prepared solution is applied to the surface with an even thickness using a metal spatula. Layer thickness is 2 mm. The thickness of the layer will need to be determined based on the size of the largest granule. The primary structures on which to be stepped must be covered with screed coat, ceramic tiles, etc. as the last layer. To apply this last layer, you will need to wait for 3 days.

CONSUMPTION: 4 kg/1 m².

PACKING AND STORAGE: It is supplied in 25 kg bags, optionally on pallets or in bags with slings (sling-bags). Shelf life in dry places where there is no danger of freezing, in the original packaging, when stacking on each other with no more than 8 rows, is a year from the date of manufacture. After opening a bag, it is recommended to use it within 1 week. Close the neck of unused packages tightly.

WARNINGS: It is forbidden to add any foreign materials (lime, cement, gypsum, etc.) to the prepared solution. Do not use an expired solution by mixing with water or with a dry solution. DECOFER is applied no less than 7 days after plastering. For greater stability of the plaster within 3 days after application, depending on weather conditions, it will be necessary to moisten the surface at certain intervals. It is recommended to use at the temperatures from + 5°C to + 35°C. In windy weather, DECOFER must be protected from rapid drying. It is forbidden to apply on frozen surfaces. Do not use in direct sunlight. Do not go beyond the scope of these instructions regarding the application surface and method of application. Do not breathe. In case of contact with eyes, rinse with plenty of water; if necessary, consult a doctor. For more information, request a product safety form. For all other questions related to the conditions of use and technical questions, please contact us for advice.

CERTIFICATE OF CONFORMITY: The above data were obtained in vitro. For more information, please contact our technical department.