Присоединяйтесь к Нам

Вступайте в нашу группу

facebook/ventumplus

Звоните Нам

Телефон/Факс

+99893 550 6717

Свяжитесь с Нами

Техническая поддержка

info@ventumplus.com

ELEGANS EXTRA

ELEGANS EXTRA

ELEGANS EXTRA® - Silicone paint for external use

DESCRIPTION: Paint for exterior facade work. 

PROPERTIES: Thanks to a labyrinth fabric in the silicone structure, VENTUM ELEGANS EXTRA® has moisture repellent properties, which helps the wall stay dry. It covers the surface firmly, thus preventing bellies and abscission of the paint layer. It has low absorption (absorbency) of water, being resistant to climatic conditions, pollution, as well as wear and tear. It does not tarnish or crack. Withstands intensive wet cleaning. Over time (under the influence of rain and sunlight), mechanical, chemical strength and wear resistance increase. The paint is resistant to ultraviolet rays. It is an environmentally friendly product. Antibacterial PROPERTIES prevent mold and mildew.

SPHERE OF APPLICATION: It is applied on the plastered, concrete, brick, asbestos-cement external surface for decorative and insulating purposes. 

SURFACE PREPARATION: The surface on which the paint or primer will be applied must be clean, dry and free from dust. Clear the surface of remains of old, wattled, bulged painting. Level protrusions and roughness on the surface. Before applying a primer or paint on wet surfaces with a large amount of lime, wipe them with vinegar mixed with water in equal proportions.

METHOD OF APPLICATION: Before application, VENTUM ELEGANS EXTRA® must be diluted with water. Apply the finished paint solution to the surface with a brush or roller. The interval between application of the layers is 2 hours. It is necessary to pay attention to the fact that during application the temperature of the air and surface should be from + 5° C to + 30°C. Do not mix with other paints.

AREA OF COATING: 1kg of paint in two layers covers area 2 of 9-12m in size (± 30% depending on the applied surface). 

DRYING OUT TIME: It dries in an hour at the temperature of + 20C °; fully hardens within 24 hours.

AFTER APPLICATION: The painted surface must be protected for 24 hours from rain, snow, frost, excessive heat and physical damage.   

STORAGE CONDITIONS: Store in unopened original packaging for 12 months.

Protect from direct sunlight, from freezing, water and humidity.

MEASURES OF PRECAUTION: S2: Keep out of the reach of children. S24/25: Avoid contact with eyes and skin. S29: Do not throw into the sewer. S46: If swallowed, seek medical advice immediately. Show the container and label to the doctor.